فایل بکاپ NVRAM برای ترمیم سریال و بیس باند شیائومی Redmi 6A -دانگل CM2

فایل بکاپ NVRAM برای ترمیم سریال و بیس باند شیائومی Redmi 6A -دانگل CM2

_________________________________________________________________________

برای خرید دانگل CM2 فوق العاده قوی از این لینک اقدام به خرید نمایید

دانگل CM2 از قدیمی ترین محصولات تیم infinity که دانگل best نوکیا نیز توسط این تیم ساخته شده است

این دانگل دارای اکتیو سالیانه می باشد و شما تا زمانی که اخرین نسخه که دانلود کرده اید را می توانید دانگل را استفاده کنید (فقط نمی توانید آپدیت های جدید را دریافت نمایید )

_________________________________________________________________________

قبل از باز کردن بوت لودر برای Redmi 6A ، مطمئن شوید مراحل زیر انجام شده است:

آخرین درایور MTK 

درایور libusb win32

cactus_global_images_V11.0.8.0.PCBMIXM_20200509.0000.00_9.0_global_5fe1e27073.tgz

Redmi_6A_NVDATA

۱- نام کاربری و رمز عبور در CM2-MT2 وارد کنید .

۲- قبل از بکاپ گیری ، ریستور و یا فلش گزینه HW Report را در باکس  CM2-MT2 بزنید .

Operation : HW Report [ v2.28 ]
HWreport : Mode : eMMC

1. Make sure device is powered off. Power off, if need. Wait 20 seconds after

2. Insert USB cable in phone

   Waiting for device connection …

PTFN : MediaTek USB Port_V1632 (COM36)
MODE : BOOTROM
PORT : 36
Waiting BOOT ack …
BROM : Skip ACK verify
BROM : Init BROM
BROM init passed!
CHIP : MT6765 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000
CODE : Cervino
TYPE : MODERN [RAPHAEL]
BROM : MEID : 89D05EA35F266EDEB7D1E3227880A5DD
BROM : SecLevel : 0x000000E7
BROM : SecMode : SBC+SLA+SDA+EXT
BROM : BROM|BL : 0x05|0xFE
BROM : BOOTROM
BROM : SOCID : 85AC622FC6EA0C6B563A57F153B53FF61115A379A49BD82B0BC25D17BAB73DEC
BROM : SLA : Local Auth
BROM : SLA : Auth Started!
BROM : SLA : Auth Passed!
BROM : SLA : 0x0000001F
BROM : PreBoot stage #1
BROM : PreBoot stage #2
AGENT : 0_base : BASE_v2112 | Manual : Disabled
AGENT : Look for suitable BootChain in DA …
AGENT : MTK_AllInOne_DA.bin
AGENT : Found MT6765
AGENT : MTK_DOWNLOAD_AGENT
BROM : Sending 1st DA …
BROM : DA sent
BROM :Transfer control to DA …
DA : AGENT started!
DA : SYNC
DA : MODE : BROM
DA : EXT_RAM NOT initialized!
EMI : DEV : INFINITY
EMI : SRC : PRELOADER_INFINITY_0
EMI : CNT : 0004
EMI : Init EMI from INTERNAL DB
EMI : EXT_RAM CFG Passed!
DA : BOOT to 2nd DA …
DA : 2ND stage confirmed!
DA : SYNC with DA passed!
DA : Receiving HW info

SRAM: 0x0003A000 [ 232.00 KB ] DRAM: 0xC0000000 [ 3.00 GB ] EMMC: CID : 90014A484247346132A5C3C881D565B7 EMMC: VEN : HYNIX : OEM : 74 : ID : 484247346132 EMMC: VEN : HYNIX : HBG4a2 EMMC: SNN : 3284697557 ( 0xC3C881D5) , MF : 6/2018 EMMC: BOOT1 : 0x00400000 [ 4.00 MB ] BOOT2 : 0x00400000 [ 4.00 MB ] RPMB : 0x00400000 [ 4.00 MB ] USER : 0x747C00000 [ 29.12 GB ] CHIP : MT6765 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000 , EVOL : 0x0000 RNID : 964B4F0ED0DCFC5DE53C4D44BD17A6E1

DA : USB : HIGH-SPEED

Boot done!

Memory Info :
CID : 90014A484247346132A5C3C881D565B7
MEM : VEN : HYNIX | OEM : 4A01 | DEV : HBG4a2
DAT : Size: 29820 MB, Max.Speed: 52000 kHz, blklen(512), nblks(61071360), ro(0)

EXT_CSD Info :
EXT_CSD rev. : v1.8 ( MMC v5.1 )
CSD struct rev. : v1.2
Supported command sets : 1h
HPI features : 1h
BG operations support : 1h
BG operations status : 0h
Correct prg. sectors : 0h
۱st init time after part. : 1000 ms
Min. write perf.(DDR,52MH,8b): 78h
Min. read perf. (DDR,52MH,8b): 8ch
TRIM timeout: 0 ms
Secure feature support: 55h
Secure erase timeout : 60000 ms
Secure trim timeout : 6000 ms
Access size : 3072 bytes
HC erase unit size : 512 kbytes
HC erase timeout : 600 ms
HC write prot grp size: 4096 kbytes
HC erase grp def. : 0h
Reliable write sect count: 1h
Sleep current (VCC) : 7h
Sleep current (VCCQ): 7h
Sleep/awake timeout : 26214400 ns
Sector count : 3a3e000h
Min. WR Perf. (52MH,8b): 8ch
Min. Read Perf.(52MH,8b): 8ch
Min. WR Perf. (26MH,8b,52MH,4b): 46h
Min. Read Perf.(26MH,8b,52MH,4b): 46h
Min. WR Perf. (26MH,4b): 1eh
Min. Read Perf.(26MH,4b): 1eh
Power class: 0
Power class(DDR,52MH,3.6V): 11h
Power class(DDR,52MH,1.9V): 0h
Power class(26MH,3.6V) : 0h
Power class(52MH,3.6V) : 0h
Power class(26MH,1.9V) : 0h
Power class(52MH,1.9V) : 0h
Part. switch timing : 1h
Out-of-INTR busy timing: 5h
Card type : 57h
Command set : 0h
Command set rev.: 0h
HS timing : 0h
Bus width : 0h
Erase memory content : 0h
Partition config : 48h
Boot partition size : 4096 kbytes
Boot information : 7h
Boot config protection: 0h
Boot bus width : 2h
Boot area write prot : 0h
User area write prot : 0h
FW configuration : 0h
RPMB size : 4096 kbytes
Write rel. setting : 1fh
Write rel. parameter: 15h
Start background ops : 0h
Enable background ops: 2h
H/W reset function : 1h
HPI management : 0h
Max. enhanced area size : e8fh (15265792 kbytes)
Part. support : 7h
Part. attribute: 0h
Part. setting : 0h
General purpose 1 size : 0h (0 kbytes)
General purpose 2 size : 0h (0 kbytes)
General purpose 3 size : 0h (0 kbytes)
General purpose 4 size : 0h (0 kbytes)
Enh. user area size : 0h (0 kbytes)
Enh. user area start: 0h
Bad block mgmt mode: 0h

Overall status :

MLC status : 10% - 20% usedSLC status : 0% - 10% usedEOL status : Normal ( Less than 80% reserved blocks used )RPMB : RPMB KEY EXISTS! [State : NOT CLEAN : UNUSABLE]STORAGE : OTP Status : UNLOCKED!

Done!
Elapsed: 00:00:19

Infinity-Box [ Chinese Miracle ] MediaTek Service Module [ MTK ] v2.28

Load IDBase v718267 Ok!

Update configuration …
Update Ok!
Load IDBase v98353 Ok!

Operation : Unlock BootLoader [ v2.28 ]

1. Make sure device is powered off. Power off, if need. Wait 20 seconds after

2. Insert USB cable in phone

   Waiting for device connection …

PTFN : MediaTek USB Port (COM36)
MODE : BOOTROM
PORT : 36
Waiting BOOT ack …
BROM : Skip ACK verify
BROM : Init BROM
BROM init passed!
CHIP : MT6765 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000
CODE : Cervino
TYPE : MODERN [RAPHAEL]
BROM : MEID : DB2C34D57DFC5914CB600E03A57FCF66
BROM : SecLevel : 0x000000E7
BROM : SecMode : SBC+SLA+SDA+EXT
BROM : BROM|BL : 0x05|0xFE
BROM : BOOTROM
BROM : SOCID : 4BA5991236EEC4E45B64761D24F1773CBCB5BA8308D13AA72985A43717F23CCB
BROM : Sending FireFly
FireFly : Starting …
FireFly : Init Core
FireFly : Core init done!
FireFly : Running : v04.04.04 on MT6765
FireFly : eMMC init passed!

EMMC: CSD : D02701328F5903FFFFFFFFE78A400017 EMMC: CSD : TEMP_WRITE_PROTECT: False EMMC: CSD : PERM_WRITE_PROTECT: False EMMC: CID : 90014A484147346132A5C1B58C64B5AF EMMC: VEN : HYNIX : OEM : 74 : ID : 484147346132 EMMC: VEN : HYNIX : HAG4a2

EMMC: SNN : 3249900644 ( 0xC1B58C64) , MF : 11/2018 EMMC: EXTCSD : rev1.8 ( eMMC 5.1 ) EMMC: EXTCSD [BOOT_BUS_WIDTH] : 0x02 EMMC: EXTCSD [PARTITION_CONFIG] : 0x48 EMMC: EXTCSD [SIZE] : Market : 16 GB EMMC: EXTCSD [SIZE] : Actual : 0x3AB400000 [ 14.68 GB ] EMMC: EXTCSD [EOL] : EOL status : Normal ( Less than 80% reserved blocks used ) EMMC: EXTCSD [EOL_A] : SLC status : 0% - 10% used EMMC: EXTCSD [EOL_B] : MLC status : 0% - 10% used EMMC: BOOT1 : 0x00400000 [ 4.00 MB ] BOOT2 : 0x00400000 [ 4.00 MB ] USER : 0x3AB400000 [ 14.68 GB ]

DA : USB : HIGH-SPEED

Boot done!

Patch Level : PPR1.180610.011
Display ID : SW_S98506AE1_V009_M13_XM_C3C_USR
Ver. CodeName : REL
Ver. Release : 9
Sec. Patch : 2020-05-01
Build Time : 08.05.2020
Product Model : Redmi 6A
Product Brand : xiaomi
Product Name : cactus
Product Device : cactus
Product Info : cactus
Product Manfct : Xiaomi
Product Board : cactus
Board Platform : mt6765

BootLoader State : Locked!

BootLoader State : Unlocked!

INFO : User confirmed PERMUNLOCK!
Operation passed!

Done!
Elapsed: 00:01:35

Reconnect Power/Cable!

و حالا از قسمت NV DATA بکاپ تهیه می کنیم .

Operation : Memory Tool Init [ v2.28 ]

1. Make sure device is powered off. Power off, if need. Wait 20 seconds after

2. Insert USB cable in phone

   Waiting for device connection …

PTFN : MediaTek USB Port_V1632 (COM36)
MODE : BOOTROM
PORT : 36
Waiting BOOT ack …
BROM : Skip ACK verify
BROM : Init BROM
BROM init passed!
CHIP : MT6765 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000
CODE : Cervino
TYPE : MODERN [RAPHAEL]
BROM : MEID : 89D05EA35F266EDEB7D1E3227880A5DD
BROM : SecLevel : 0x000000E7
BROM : SecMode : SBC+SLA+SDA+EXT
BROM : BROM|BL : 0x05|0xFE
BROM : BOOTROM
BROM : SOCID : 85AC622FC6EA0C6B563A57F153B53FF61115A379A49BD82B0BC25D17BAB73DEC
BROM : SLA : Local Auth
BROM : SLA : Auth Started!
BROM : SLA : Auth Passed!
BROM : SLA : 0x0000001F
BROM : PreBoot stage #1
BROM : PreBoot stage #2
AGENT : 0_base : BASE_v2112 | Manual : Disabled
AGENT : Look for suitable BootChain in DA …
AGENT : MTK_AllInOne_DA.bin
AGENT : Found MT6765
AGENT : MTK_DOWNLOAD_AGENT
BROM : Sending 1st DA …
BROM : DA sent
BROM :Transfer control to DA …
DA : AGENT started!
DA : SYNC
DA : MODE : BROM
DA : EXT_RAM NOT initialized!
EMI : DEV : INFINITY
EMI : SRC : PRELOADER_INFINITY_0
EMI : CNT : 0004
EMI : Init EMI from INTERNAL DB
EMI : EXT_RAM CFG Passed!
DA : BOOT to 2nd DA …
DA : 2ND stage confirmed!
DA : SYNC with DA passed!
DA : Receiving HW info

SRAM: 0x0003A000 [ 232.00 KB ] DRAM: 0xC0000000 [ 3.00 GB ] EMMC: CID : 90014A484247346132A5C3C881D565B7 EMMC: VEN : HYNIX : OEM : 74 : ID : 484247346132 EMMC: VEN : HYNIX : HBG4a2 EMMC: SNN : 3284697557 ( 0xC3C881D5) , MF : 6/2018 EMMC: BOOT1 : 0x00400000 [ 4.00 MB ] BOOT2 : 0x00400000 [ 4.00 MB ] RPMB : 0x00400000 [ 4.00 MB ] USER : 0x747C00000 [ 29.12 GB ] CHIP : MT6765 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000 , EVOL : 0x0000 RNID : 964B4F0ED0DCFC5DE53C4D44BD17A6E1

DA : USB : HIGH-SPEED

Boot done!

Set default path : C:\InfinityBox\CM2MT2\phdata\

Ready!

Operation : Read Memory

Reading selected partitions [8]
[۰] Read partition : NVCFG
Saved to : C:\InfinityBox\CM2MT2\phdata\NVCFG.bin
[۱] Read partition : NVDATA
Saved to : C:\InfinityBox\CM2MT2\phdata\NVDATA.bin
[۲] Read partition : PROTECT1
Saved to : C:\InfinityBox\CM2MT2\phdata\PROTECT1.bin
[۳] Read partition : PROTECT2
Saved to : C:\InfinityBox\CM2MT2\phdata\PROTECT2.bin
[۴] Read partition : SECCFG
Saved to : C:\InfinityBox\CM2MT2\phdata\SECCFG.bin
[۵] Read partition : PERSIST
Saved to : C:\InfinityBox\CM2MT2\phdata\PERSIST.bin
[۶] Read partition : EFUSE
Saved to : C:\InfinityBox\CM2MT2\phdata\EFUSE.bin
[۷] Read partition : NVRAM
Saved to : C:\InfinityBox\CM2MT2\phdata\NVRAM.bin

Operation finished!

Close MemoryTool session

Done!
Elapsed: 00:03:03

Reconnect Power/Cable!

_________________________________________________________________________

فایل بکاپ NVRAM برای ترمیم سریال و بیس باند شیائومی Redmi 6A -دانگل CM2

_________________________________________________________________________

آموزش های بیشتر سایت دکتر موبایل را در این مطلب ببنید 

مطالب و آموزش های بیشتر سایت دکتر موبایل 

مطالب و آموزش های بیشتر سایت دکتر هارد eMMC